cisco 300-101 route training program

cisco 300-101 route training program is available for the candidates to prepare the test. Share some 300-101 route questions and answers below.

Which three conditions can cause BGP neighbor establishment to fail? (Select three)
A. There is an access list blocking all TCP traffic between the two BGP neighbors.
B. The EBGP neighbor is not directly connected, and the ebgp-multi-hop option is set to the default valu
C. The IBGP neighbor is not directly connected.
D. BGP synchronization is enabled in a Transit AS with fully-meshed IBGP neighbors.
E. The BGP update interval is different between the two BGP neighbors.
F. The BGP neighbor is referencing an incorrect AS number in its neighbor statement.
Answer: A,B,F

cisco 300-101 route training program, 300-101 route exam, 300-101 route test

Which three of the statements below correctly describe the characteristics of Autonomous Systems in routed networks? (Select three)
A. Within an AS, all routers must run either BGP or IBGP.
B. An AS uses exterior gateway protocols (EGPs) to exchange information with other autonomous systems.
C. An AS is a group of routers under the same technical administration.
D. Within an AS, routes learned through BGP can be redistributed using interior gateway protocols.
E. Within an AS, routes learned through an interior protocol cannot be redistributed using BGP to other autonomous systems.
Answer: B,C,D

What are the two reasons for the appearance of 0.0.0.0 as the next hop for a network when using the “show ip bgp” command? (Choose two)
A. The network was originated via redistribution of an interior gateway protocol into BGP.
B. The network was defined by a static route.
C. The network was learned via IBGP.
D. The network was learned via EBGP.
E. The network was originated via a network or aggregate command.
Answer: A,E

What are two rules for compacting IPv6 addresses? (Choose two.)
A. Every 16-bit segment segment that consists of all zeroes can be represented with a single colon.
B. The trailing zeroes in any 16-bit segment do not have to be written.
C. The leading zeroes in any 16-bit segment do not have to be written.
D. Any single, continuous string of one or more 16-bit segments that consists of all zeroes can be represented with a double colon.
E. The maximum number of times a double colon can replace a 16-bit segment that consists of all zeroes is two.
F. Two zeroes in the middle of any 16-bit segment do not have to be written.
Answer: C,D

Practice cisco 300-101 route training program online here. 

Article from : http://www.ccnp2015.com/cisco-300-101-route-training-program/

One thought on “cisco 300-101 route training program

  1. 13bHi Sir,How many Cisco routers you have in your ititsnute to teach us, I want to learn CCNA, and what is the fee for CCNA Course, will you provide job guarantee if I join for only CCNA.

Leave a Reply

Your email address will not be published. Required fields are marked *